Appendix
The table below contains the list of designable fields on Nastran Cards that Attune supports. These will be able to be used to create design variables on the Configuration Form and updated automatically in the Current Design Variables to Input command in the Export menu on the Attune main form.
Any designable field is supported by the Attune optimization routines as long as Nastran does - provided that those design variables are created by the user. They also will not be able to be used to update the final design to bulk. The intermediate Current Design Variables to Input iterations will still work, as these modify the DESVAR cards and not the properties themselves. Please notify Attune support of any designable property you encounter that is not supported by Attune, so adding it can be investigated.
Nastran Card |
Designable Field |
Field Description |
---|---|---|
CONM2 |
M |
Mass |
CONM2 |
Iij |
Mass moment of inertia |
CELAS2 |
K |
Stiffness of scalar spring |
PBAR |
A |
Area of bar cross section |
PBAR |
I1 |
Area moment of inertia for bending in plane 1 |
PBAR |
I2 |
Area moment of inertia for bending in plane 2 |
PBAR |
J |
Torsional stiffness parameter |
PBAR |
NSM |
Nonstructural mass |
PBAR |
K1 |
Area factor for shear (plane 1) |
PBAR |
K2 |
Area factor for shear (plane 2) |
PBARL |
DIMi |
Dimensions for cross section |
PBARL |
NSM |
Nonstructural mass |
PBEAM |
A |
Area of beam cross section |
PBEAM |
I1 |
Area moment of inertia for bending in plane 1 |
PBEAM |
I2 |
Area moment of inertia for bending in plane 2 |
PBEAM |
I12 |
Area product of inertia |
PBEAM |
J |
Torsional stiffness parameter |
PBEAM |
NSM |
Nonstructural mass |
PBEAML |
DIMi |
Dimensions for cross section |
PBEAML |
NSM |
Nonstructural mass |
PBUSH |
Ki |
Nominal stiffness values in directions 1-6 |
PCOMP |
Ti |
Thickness of individual plies |
PCOMP |
THETAi |
Angle of individual plies |
PCOMP |
NSM |
Nonstructural mass |
PELAS |
K1 |
Elastic property value |
PROD |
A |
Area of the rod |
PROD |
J |
Torsional stiffness parameter |
PROD |
NSM |
Nonstructural mass |
PSHELL |
T |
Shell thickness |
PSHELL |
12I/T**3 |
Bending moment of inertia ratio |
PSHELL |
TS/T |
Transverse shear thickness ratio |
PSHELL |
NSM |
Nonstructural mass |
PSHEAR |
T |
Thickness of shear panel |
PSHEAR |
NSM |
Nonstructural mass |
PTUBE |
OD |
Outer diameter of tube |
PTUBE |
OD2 |
Diameter of tube at second grid point |
PTUBE |
T |
Thickness of tube |
PTUBE |
NSM |
Nonstructural mass |
MAT1 |
E |
Young’s modulus |
MAT1 |
G |
Shear modulus |
MAT1 |
NU |
Poisson’s ratio |
MAT1 |
RHO |
Mass density |
MAT1 |
A |
Thermal expansion coefficient |
MAT2 |
Gij |
Material property matrix |
MAT2 |
RHO |
Mass density |
MAT2 |
Ai |
Thermal expansion coefficient vector |
MAT4 |
K |
Thermal conductivity |
MAT4 |
CP |
Heat capacity per unit mass |
MAT4 |
RHO |
Mass density |
MAT4 |
H |
Free convection heat transfer coefficient |
MAT4 |
m |
Dynamic viscosity |
MAT8 |
E1 |
Modulus of elasticity in longitudinal direction |
MAT8 |
E2 |
Modulus of elasticity in lateral direction |
MAT8 |
NU12 |
Poisson’s ratio |
MAT8 |
G12 |
In-plane shear modulus |
MAT8 |
G1Z |
Transverse shear modulus for shear in 1-Z plane |
MAT8 |
G2Z |
Transverse shear modulus for shear in 2-Z plane |
MAT8 |
RHO |
Mass density |
MAT8 |
A1 |
Thermal expansion coefficient in 1 direction |
MAT8 |
A2 |
Thermal expansion coefficient in 2 direction |
MAT9 |
Cij |
Elements of material property mat |
MAT9 |
RHO |
Mass density |
MAT9 |
Ai |
Thermal expansion coefficients |
MAT11 |
E1 |
Modulus of elasticity in longitudinal direction |
MAT11 |
E2 |
Modulus of elasticity in lateral direction |
MAT11 |
E3 |
Modulus of elasticity in ply layup direction |
MAT11 |
NU12 |
Poisson’s ratio |
MAT11 |
NU13 |
Poisson’s ratio |
MAT11 |
NU23 |
Poisson’s ratio |
MAT11 |
G12 |
Shear modulus in plane 1-2 |
MAT11 |
G13 |
Transverse shear modulus in shear in 1-3 plane |
MAT11 |
G23 |
Transverse shear modulus in shear in 1-4 plane |
MAT11 |
RHO |
Mass density |
MAT11 |
A1 |
Thermal expansion coefficient in longitudinal direction |
MAT11 |
A2 |
Thermal expansion coefficient in lateral direction |
MAT11 |
A3 |
Thermal expansion coefficient in thickness direction |